The Market Reports

SynopsisSeals used in the chemical transportation industry are majorly made from either polytetrafluoroethylene (PTFE) or perfluoroelastomer (FFKM) or ethylene propylene diene monomer (EPDM). These materials provide exceptional durability, excellent wear resistance, a.....

SynopsisStereolithography (SLA) was the first 3D printing technology. An SLA printer makes use of mirrors, with one positioned on the X-axis and another on the Y-axis. These mirrors rapidly aim a laser beam across the vat of resin, curing and solidifying a cross-secti.....

SynopsisSelective laser sintering (SLS) is a SLS method which uses infrared laser as energy source.During processing, the powder is first preheated to a temperature slightly below its melting point, and then the powder is smoothed out under the action of a scraping st.....

SynopsisSLS (Selective Laser Sintering) is a 3D printing technology that uses a laser beam to sinter powdered material. This technique enables the 3D printing of detailed functional parts and prototypes. Five to ten years ago, SLS technology was exclusive to large, in.....

SynopsisSLS (Selective Laser Sintering) is a 3D printing technology that uses a laser beam to sinter powdered material. This technique enables the 3D printing of detailed functional parts and prototypes. Five to ten years ago, SLS technology was exclusive to large, in.....

SynopsisFused Deposition Modeling (FDM) or Fused Filament Fabrication (FFF) is one of the most commonly used 3D printing technology. The high usability and increased practicality of 3D printing of complex shapes has led to this high popularity of the technology......

SynopsisFDM (Fused Deposition Modeling) 3D printing is a technology that works both horizontally and vertically, where an extrusion nozzle moves over a build platform. The process involves the use of thermoplastic material that reaches melting point and is then forced.....

SynopsisFDM (Fused Deposition Modeling) 3D printing is a technology that works both horizontally and vertically, where an extrusion nozzle moves over a build platform. The process involves the use of thermoplastic material that reaches melting point and is then forced.....

SynopsisElectron Beam Melting (EBM) is part of the powder bed fusion family. Unlike Laser Powder Bed Fusion (LPBF), it uses, as its name suggests, an electron beam to fuse metal particles and create, layer by layer, the desired part. Marketed by the Swedish company Ar.....

SynopsisDLP (Digital Light Processing) is a similar process to stereolithography in that it is a 3D printing process that works with photopolymers. The major difference is the light source. DLP uses a more conventional light source, such as an arc lamp with a liquid c.....