SynopsisThe knock sensor is located on the engine block, cylinder head or intake manifold. This is because its function is to sense vibrations caused by engine knock or detonation. The PCM uses this signal to alter the ignition timing and prevent detonation. It will c.....
SynopsisThe eccentric shaft position sensor is used as a feedback for the Valvetronic eccentric camshaft. The eccentric shaft is actuated by the Valvetronic motor and in return controls variable intake valve lift. The eccentric shaft sensor is mounted to the cylinder .....
SynopsisThe CAM sensor or camshaft position sensor's role is to signal the ECM the camshaft position. The crank and cam sensor operates in sync with eachother. The CAM sensor is frequently used in determining which injector to fire in a sequential system and for the C.....
SynopsisA crank sensor is an electronic device used in an internal combustion engine, both petrol and diesel, to monitor the position or rotational speed of the crankshaft. This information is used by engine management systems to control the fuel injection or the igni.....
SynopsisAir fuel ratio sensor is to measure the oxygen content in the exhaust and provide the feedback to the engine computer (PCM). Based on air fuel ratio sensor signal, the computer adjusts the air to fuel ratio to keep it at the optimum level, which is about 14.7:.....
SynopsisThe fuel pump strainer (also known as a pre-filter or fuel sock) is a fuel system's first line of defense against contamination from dirt, dust, or other fine particles found in regular pump gasoline. Gasoline has a tendency to varnish over time, leaving a thi.....
SynopsisAn air–fuel ratio meter monitors the air–fuel ratio of an internal combustion engine. Also called air–fuel ratio gauge, air–fuel meter, or air–fuel gauge. It reads the voltage output of an oxygen sensor, sometimes also called AFR sensor or lambda sensor, wheth.....
SynopsisAutomotive Cabin Trim Interior belongs to automotive interiors segment being a part of the automotive ancillary’s sector. The global Automotive Cabin Trim Interior market was valued at US$ 24780 million in 2023 and is anticipated to reach US$ 33090 milli.....
SynopsisThe roles of luggage trim such as trunk-through layouts or three-row seating have been greatly changing. We propose multifunctional products to meet multipurpose needs while enhancing superior feeling as an extension of cabin trim. The global Automotive .....
SynopsisAs the noise reduction level of engines and tires has been improving, the demand for noise insulation parts such as dash insulator has been increasing. We are participating in vehicle development from the initial stage and concentrating its efforts to enhance .....
