SynopsisContact fingers with several spring-loaded single fingers enable a good contact even when the contact surface at the carrier is not smooth. Ideally the contact fingers are equipped with wiper grooves to clean off loose dirt when the carrier enters. The g.....
SynopsisA bearing sleeve is a sleeve on a propeller shaft or stern shaft. The bearing is a component that fixes and reduces the friction coefficient of the load during the mechanical transmission process. The same thing between the bushing and the bearing is that both.....
SynopsisScissor gears are used to reduce rattling. Scissor gears are applied to driving gears or driven gears, one gear is connected to the other gears through a scissor spring. Therefore, when the corresponding gear of the teeth meshes with the scissors gear, the sci.....
SynopsisThe starter ring gear is the component that is connected to the internal combustion engine, the part of the assembly that transmits torque from the starter motor to the engine's crankshaft in order to start the engine. The starter ring is usually made of mediu.....
SynopsisA rail transit gear is a mechanical system formed by mounting gears on a frame such that the teeth of the gears mesh. Designed to ensure that the pitch circles of meshing gears roll against each other without slipping, providing a smooth transfer of rotation f.....
SynopsisPicosecond laser cutting machine is mainly composed of picosecond laser, light guide, focusing system, displacement platform, computer control system and other auxiliary systems. Picosecond laser is a high peak ultrashort pulse laser. The principle is that the.....
SynopsisThe TDR impedance test system is the main tool for measuring the characteristic impedance of transmission lines. TDR is mainly composed of three parts: fast edge signal generator, sampling oscilloscope and probe system. TDR sends a pulse or step signal to the .....
SynopsisThe prepreg cutting machine is a mechatronics system that integrates numerical control, monitoring technology and mechanical processing technology. The global Prepreg Cutting Machine market was valued at US$ million in 2023 and is anticipated to reach US.....
SynopsisThe hole checker is suitable for the steps after PCB drilling and before PCB packaging, to detect the number of holes, hole diameter and quality (such as plug holes, foreign objects, slot length defects), and automatically make OK/NG judgments. The globa.....
SynopsisLine width measuring machine is mainly used in the measurement of key line width dimensions in the front-end process of flat panel display. The global Line Width Measuring Machine market was valued at US$ million in 2023 and is anticipated to reach US$ m.....
