SynopsisShort-delay detonators provide a short-delay, non-electrically activated subterranean detonation mode. For use with detonating cord mains. For controlled blasting and good fragmentation, resulting in easy handling and good ground vibration, controlled noise an.....
SynopsisA long-delay detonator is an electric detonator that has a time delay of several seconds before detonating. Designed to provide the detonation sequence for explosives in quarries, surface operations, surface mines and construction projects, providing the preci.....
SynopsisAutomotive engine knock sensors identify the high-frequency engine vibration signature of knock and transmit the signal to the ECU. The goal is to get maximum energy output by starting the ignition as early as possible. Engines with knock sensors reduce fuel c.....
SynopsisThe canister solenoid valve is a device installed on a car or motorcycle to reduce air pollution caused by fuel evaporative emissions and increase fuel efficiency at the same time. A car's carbon canister is usually designed as a long "box" that connects betwe.....
SynopsisThe water heater gas valve is a multifunctional water storage type electric water heater safety pressure relief valve, which is suitable for electric water heaters and air energy water heaters. When the pressure of the inner tank is too high, the excess pressu.....
SynopsisLatches and switch chips are based on the principle of the Hall effect, converting information about the magnetic field strength of a magnet into a digital signal (1 or 0). Therefore, its output is On or Off, depending on the applied magnetic field. From the p.....
SynopsisThe digital compass IC is a surface mount multi-chip module designed for low-field magnetic field sensing with a digital interface for applications such as low-cost compasses and magnetometers. Applications include consumer electronics, automated navigation sy.....
SynopsisThe industrial lighting LED driver IC is an integrated circuit that converts the power supply into a specific voltage and current to drive the LED to emit light. Unlike traditional incandescent lamps, LED lighting products cannot be directly connected to AC ma.....
SynopsisThe load switch IC is a power supply IC processed by CMOS technology, which is characterized by built-in output transistors and output driver ICs. Compared to traditional discrete structures, the size of the system is greatly reduced. It also features low volt.....
SynopsisThe USB switch chip has the characteristics of low inter-symbol offset, high channel noise isolation, and large bandwidth. Prevents damage to the device when the switch is shorted to the USB bus power supply. The global USB Switch ICs market was valued a.....
