SynopsisA black body calibration source is a tool for checking the calibration of an infrared temperature sensor. It consists of a heated (or cooled) target object whose temperature is precisely known, and is the basis for accurate calibration of infrared pyrometers.
SynopsisThe Type K thermocouple (chromel -alumel) is the most commonly used general purpose thermocouple. It is inexpensive and a wide variety of probes are available in its −200 °C to +1350 °C / -330 °F to +2460 °F range. Sensitivity is approximately 41 µV/°C. Wi.....
SynopsisThe Type J thermocouple (iron–constantan) is a common, general purpose thermocouple with a termperature range of approximately −40 to +750 °C, and sensitivity of 55 µV/°C. Wire color standard is white (+) and red (-). The global Type J Thermocouples mar.....
SynopsisThe flange thermowell is used when pressure, high velocity and corrosive process media exist. This serves to isolate and protect the sensing instrument, and permits removal of a sensing instrument without shutting down the process. The global Flange Ther.....
SynopsisA bimetallic thermostat consists of a strip of two different metals having different coefficients of linear expansion. The global Bimetallic Thermostats market was valued at US$ million in 2023 and is anticipated to reach US$ million by 2030, witnessing.....
SynopsisA probe thermometer is a thermometer that has a pointy metal stem that can be inserted into food. Use a probe thermometer to check internal food temperatures when you cook, re-heat, cool, thaw, and keep foods hot or cold. There are different types of probe the.....
SynopsisA control knob is a rotary control used to provide input to a device when grasped by an operator and turned, so that the degree of rotation corresponds to the desired input. Such knobs are one of the most common components in control systems and are found on a.....
SynopsisAir Velocity Transmitter with Remote Probe connects the sensing probe with the electronic enclosure allowing the enclosure to be mounted where it can be accessed. Air Velocity Transmitter is used for dirty air flow applications. Applications include clean room.....
SynopsisA non-contact tachometer sends out a beam of light. That beam reflects each time the tape or reflective mark makes a full rotation. The receiver counts these reflections over time to display the rotational speed in revolutions per minute. The global Non-.....
SynopsisContact tachometers take measurements through direct contact with the moving surface, while non-contact tachometers take measurements from a distance using a beam of infrared light. Contact tachometers can measure both RPM and surface speed. The global C.....








