SynopsisHouses that are designed and built using construction technologies that use the 3D printing method are known as 3D printed homes. 3D printed homes are faster to build and are superior to the traditionally constructed structures in many ways. 3D-printed homes a.....
SynopsisThe non-condensing steam turbine uses high-pressure steam for the rotation of blades. This steam then leaves the turbine at the atmospheric pressure or lower pressure. The pressure of outlet steam depends on in the load, therefore, this turbine is also known a.....
SynopsisBack pressure turbines utilize the pressure differential between the intake steam and the expelled steam to efficiently convert part of the thermal energy of the steam into mechanical energy. The exhaust pressure is designed to be higher than atmospheric press.....
SynopsisCombustion burner combines fuel with an air/gas mixture to achieve controlled combustion inside of the system. Industrial combustion burners are used to facilitate controlled combustion. By combining and then igniting fuel and air/gas, they provide heat that h.....
SynopsisA biomass combustion system burns renewable biomass fuel (e.g., wood, field crops) to produce heat. Commercial-scale systems are different from smaller residential systems in that they typically (1) incorporate automated feed and control systems and (2) requir.....
SynopsisBiosolids are nutrient rich organic materials from wastewater treatment facilities. In other words, biosolids are treated sewage sludge that have strict regulatory requirements prior to reuse. Through physical, chemical and biological processes, solids are rem.....
SynopsisSludge dryer can provide for a renewable energy resource or a high quality fertilizer. Municipal and industrial wastewater treatment processes generate large amounts of sludge. Sludge is a solid, semisolid, or slurry residual material that from the different p.....
SynopsisSome caps are threaded and screw on to the outside of a pipe or tube to cover the end. Other caps are more like a plug that fits snugly into the end of the tube to protect the inside. Plastic end caps are typically manufactured using one of the following proce.....
SynopsisPipe End Caps or dust caps are used to seal off the end of a pipe to prevent dust or moisture from entering the pipe. Relatively inexpensive, these dust end caps can save a lot of time and money for installation crews, eliminating the need to clean out the int.....
SynopsisEnd plugs are used to plug the end of tubing, pipes and bars in a variety of commercial and industrial products. Plugs can be made out of various plastic materials, but they are all designed to fit snugly in the end of a tube to keep liquid in or keep dirt out.....
