The Market Reports
Call: +1-631-407-1315 / +91-750-729-1479
Email: sales@themarketreports.com
Global DIN 2353 Tube Fittings Market 2025 by Manufacturers, Regions, Type and Application, Forecast to 2029
Synopsis
The global DIN 2353 Tube Fittings market size was valued at USD 359.2 million in 2022 and is forecast to a readjusted size of USD 439.1 million by 2029 with a CAGR of 2.9% during review period.
DIN2353 fittings are the most widely used bite-type fittings in the world, and they don’t require O-rings or other elastomers to make a leak-tight seal.
DIN 2353 tube fittings are used in a wide variety of fluid power applications, especially in factory, oil & gas, and construction equipment. Metric sizes from 4 to 42mm made of carbon steel or stainless steel are most prevalent. DIN (Deutsches Institut für Normung, translated as the German Institute for Standardization) metric and BSPP (British Standard Parallel Pipe) are the most common thread styles in Europe. DIN type tube fittings conform to the requirements of ISO 8434-1, DIN 2353, and DIN EN 3850 standards. This ensures interchangeability among leading brands of fittings.
DIN2353 metric fittings are available in three series of tube port end connections: tube-to-tube, tube-to-female port, and tube-to-male thread. They are also offered in three different pressure series—LL for Extra Light and intended for low-pressure applications, L for Light and used medium-pressure applications, and S for Heavy, used high-pressure applications. They are identified by measuring the thread size, pitch and the tube’s outside diameter (OD).
As with other compression-style fittings, DIN 2353 fittings consist of a body, cutting ring (ferrule) and nut. DIN connections are used in:
tube fittings
alternating valves
banjo and swivel couplings, and
check and non-return valves.
These flareless metric fittings are the most widely used bite-type fittings in the world. As with other compression-style fittings, DIN fittings consist of a body, cutting ring (ferrule) and nut. No O-rings or other elastomeric components are needed to provide a seal. Instead, two cutting edges of a ring (ferrule) bite into the outer surface of the tube, ensuring the necessary holding power and seal for high operating pressures and extreme vibration.
DIN Compression Fittings are designed for leak-free connections processing instrumentation and industrial piping system applications. Such as oil & gas, chemical, shipbuilding, Marine & trucks…It requires a higher pressure and temperature, and high anti-corrosion conditions.
In the global market, the core manufacturers of DIN 2353 tube fittings include Hy-Lok, VOSS, STAUFF (LUKAD Holding), Volz and CAST S.p.A. etc, and the top 5 manufacturers account for above 30% of the market share. The market include Europe, Asia Pacific and North America, with a share of 42%, 27% and 20%. Stainless steel tube fittings accounted for 59% and carbon steel tube fittings accounted for 24%. The product is mainly used in industrial application and engineering machinery fields, with a share of 47% and 27%.
The Global Info Research report includes an overview of the development of the DIN 2353 Tube Fittings industry chain, the market status of Industrial Application (Stainless Steel Tube Fittings, Carbon Steel Tube Fittings), Engineering Machinery (Stainless Steel Tube Fittings, Carbon Steel Tube Fittings), and key enterprises in developed and developing market, and analysed the cutting-edge technology, patent, hot applications and market trends of DIN 2353 Tube Fittings.
Regionally, the report analyzes the DIN 2353 Tube Fittings markets in key regions. North America and Europe are experiencing steady growth, driven by government initiatives and increasing consumer awareness. Asia-Pacific, particularly China, leads the global DIN 2353 Tube Fittings market, with robust domestic demand, supportive policies, and a strong manufacturing base.
Key Features:
The report presents comprehensive understanding of the DIN 2353 Tube Fittings market. It provides a holistic view of the industry, as well as detailed insights into individual components and stakeholders. The report analysis market dynamics, trends, challenges, and opportunities within the DIN 2353 Tube Fittings industry.
The report involves analyzing the market at a macro level:
Market Sizing and Segmentation: Report collect data on the overall market size, including the sales quantity (K Units), revenue generated, and market share of different by Material (e.g., Stainless Steel Tube Fittings, Carbon Steel Tube Fittings).
Industry Analysis: Report analyse the broader industry trends, such as government policies and regulations, technological advancements, consumer preferences, and market dynamics. This analysis helps in understanding the key drivers and challenges influencing the DIN 2353 Tube Fittings market.
Regional Analysis: The report involves examining the DIN 2353 Tube Fittings market at a regional or national level. Report analyses regional factors such as government incentives, infrastructure development, economic conditions, and consumer behaviour to identify variations and opportunities within different markets.
Market Projections: Report covers the gathered data and analysis to make future projections and forecasts for the DIN 2353 Tube Fittings market. This may include estimating market growth rates, predicting market demand, and identifying emerging trends.
The report also involves a more granular approach to DIN 2353 Tube Fittings:
Company Analysis: Report covers individual DIN 2353 Tube Fittings manufacturers, suppliers, and other relevant industry players. This analysis includes studying their financial performance, market positioning, product portfolios, partnerships, and strategies.
Consumer Analysis: Report covers data on consumer behaviour, preferences, and attitudes towards DIN 2353 Tube Fittings This may involve surveys, interviews, and analysis of consumer reviews and feedback from different by Application (Industrial Application, Engineering Machinery).
Technology Analysis: Report covers specific technologies relevant to DIN 2353 Tube Fittings. It assesses the current state, advancements, and potential future developments in DIN 2353 Tube Fittings areas.
Competitive Landscape: By analyzing individual companies, suppliers, and consumers, the report present insights into the competitive landscape of the DIN 2353 Tube Fittings market. This analysis helps understand market share, competitive advantages, and potential areas for differentiation among industry players.
Market Validation: The report involves validating findings and projections through primary research, such as surveys, interviews, and focus groups.
Market Segmentation
DIN 2353 Tube Fittings market is split by Material and by Application. For the period 2018-2029, the growth among segments provides accurate calculations and forecasts for consumption value by Material, and by Application in terms of volume and value.
Market segment by Material
Stainless Steel Tube Fittings
Carbon Steel Tube Fittings
Brass Tube Fittings
Market segment by Application
Industrial Application
Engineering Machinery
Shipbuilding & Railway
Energy and Power
Others
Major players covered
VOSS
STAUFF (LUKAD Holding)
Rastelli Raccordi
CAST S.p.A.
Volz
Interpump Group
Blanke Armaturen
Hy-Lok
Parker Hannifin
Gates EMB
Schwer Fittings
DK-LOK
Superlok (BMT)
PH Industrie-Hydraulik
Alfagomma
EXMAR (SERTO)
CONEXA GmbH
Manuli Hydraulics
Hansun Engineering
Eaton
SHINILACE
Armaturen-Arndt
HSME Corporation
Cangzhou QC Hydraulics
Eurofit
Sekwang Hi-Tech
Leku-Ona
Market segment by region, regional analysis covers
North America (United States, Canada and Mexico)
Europe (Germany, France, United Kingdom, Russia, Italy, and Rest of Europe)
Asia-Pacific (China, Japan, Korea, India, Southeast Asia, and Australia)
South America (Brazil, Argentina, Colombia, and Rest of South America)
Middle East & Africa (Saudi Arabia, UAE, Egypt, South Africa, and Rest of Middle East & Africa)
The content of the study subjects, includes a total of 15 chapters:
Chapter 1, to describe DIN 2353 Tube Fittings product scope, market overview, market estimation caveats and base year.
Chapter 2, to profile the top manufacturers of DIN 2353 Tube Fittings, with price, sales, revenue and global market share of DIN 2353 Tube Fittings from 2018 to 2023.
Chapter 3, the DIN 2353 Tube Fittings competitive situation, sales quantity, revenue and global market share of top manufacturers are analyzed emphatically by landscape contrast.
Chapter 4, the DIN 2353 Tube Fittings breakdown data are shown at the regional level, to show the sales quantity, consumption value and growth by regions, from 2018 to 2029.
Chapter 5 and 6, to segment the sales by Material and application, with sales market share and growth rate by material, application, from 2018 to 2029.
Chapter 7, 8, 9, 10 and 11, to break the sales data at the country level, with sales quantity, consumption value and market share for key countries in the world, from 2017 to 2022.and DIN 2353 Tube Fittings market forecast, by regions, material and application, with sales and revenue, from 2024 to 2029.
Chapter 12, market dynamics, drivers, restraints, trends, Porters Five Forces analysis, and Influence of COVID-19 and Russia-Ukraine War.
Chapter 13, the key raw materials and key suppliers, and industry chain of DIN 2353 Tube Fittings.
Chapter 14 and 15, to describe DIN 2353 Tube Fittings sales channel, distributors, customers, research findings and conclusion.
The global DIN 2353 Tube Fittings market size was valued at USD 359.2 million in 2022 and is forecast to a readjusted size of USD 439.1 million by 2029 with a CAGR of 2.9% during review period.
DIN2353 fittings are the most widely used bite-type fittings in the world, and they don’t require O-rings or other elastomers to make a leak-tight seal.
DIN 2353 tube fittings are used in a wide variety of fluid power applications, especially in factory, oil & gas, and construction equipment. Metric sizes from 4 to 42mm made of carbon steel or stainless steel are most prevalent. DIN (Deutsches Institut für Normung, translated as the German Institute for Standardization) metric and BSPP (British Standard Parallel Pipe) are the most common thread styles in Europe. DIN type tube fittings conform to the requirements of ISO 8434-1, DIN 2353, and DIN EN 3850 standards. This ensures interchangeability among leading brands of fittings.
DIN2353 metric fittings are available in three series of tube port end connections: tube-to-tube, tube-to-female port, and tube-to-male thread. They are also offered in three different pressure series—LL for Extra Light and intended for low-pressure applications, L for Light and used medium-pressure applications, and S for Heavy, used high-pressure applications. They are identified by measuring the thread size, pitch and the tube’s outside diameter (OD).
As with other compression-style fittings, DIN 2353 fittings consist of a body, cutting ring (ferrule) and nut. DIN connections are used in:
tube fittings
alternating valves
banjo and swivel couplings, and
check and non-return valves.
These flareless metric fittings are the most widely used bite-type fittings in the world. As with other compression-style fittings, DIN fittings consist of a body, cutting ring (ferrule) and nut. No O-rings or other elastomeric components are needed to provide a seal. Instead, two cutting edges of a ring (ferrule) bite into the outer surface of the tube, ensuring the necessary holding power and seal for high operating pressures and extreme vibration.
DIN Compression Fittings are designed for leak-free connections processing instrumentation and industrial piping system applications. Such as oil & gas, chemical, shipbuilding, Marine & trucks…It requires a higher pressure and temperature, and high anti-corrosion conditions.
In the global market, the core manufacturers of DIN 2353 tube fittings include Hy-Lok, VOSS, STAUFF (LUKAD Holding), Volz and CAST S.p.A. etc, and the top 5 manufacturers account for above 30% of the market share. The market include Europe, Asia Pacific and North America, with a share of 42%, 27% and 20%. Stainless steel tube fittings accounted for 59% and carbon steel tube fittings accounted for 24%. The product is mainly used in industrial application and engineering machinery fields, with a share of 47% and 27%.
The Global Info Research report includes an overview of the development of the DIN 2353 Tube Fittings industry chain, the market status of Industrial Application (Stainless Steel Tube Fittings, Carbon Steel Tube Fittings), Engineering Machinery (Stainless Steel Tube Fittings, Carbon Steel Tube Fittings), and key enterprises in developed and developing market, and analysed the cutting-edge technology, patent, hot applications and market trends of DIN 2353 Tube Fittings.
Regionally, the report analyzes the DIN 2353 Tube Fittings markets in key regions. North America and Europe are experiencing steady growth, driven by government initiatives and increasing consumer awareness. Asia-Pacific, particularly China, leads the global DIN 2353 Tube Fittings market, with robust domestic demand, supportive policies, and a strong manufacturing base.
Key Features:
The report presents comprehensive understanding of the DIN 2353 Tube Fittings market. It provides a holistic view of the industry, as well as detailed insights into individual components and stakeholders. The report analysis market dynamics, trends, challenges, and opportunities within the DIN 2353 Tube Fittings industry.
The report involves analyzing the market at a macro level:
Market Sizing and Segmentation: Report collect data on the overall market size, including the sales quantity (K Units), revenue generated, and market share of different by Material (e.g., Stainless Steel Tube Fittings, Carbon Steel Tube Fittings).
Industry Analysis: Report analyse the broader industry trends, such as government policies and regulations, technological advancements, consumer preferences, and market dynamics. This analysis helps in understanding the key drivers and challenges influencing the DIN 2353 Tube Fittings market.
Regional Analysis: The report involves examining the DIN 2353 Tube Fittings market at a regional or national level. Report analyses regional factors such as government incentives, infrastructure development, economic conditions, and consumer behaviour to identify variations and opportunities within different markets.
Market Projections: Report covers the gathered data and analysis to make future projections and forecasts for the DIN 2353 Tube Fittings market. This may include estimating market growth rates, predicting market demand, and identifying emerging trends.
The report also involves a more granular approach to DIN 2353 Tube Fittings:
Company Analysis: Report covers individual DIN 2353 Tube Fittings manufacturers, suppliers, and other relevant industry players. This analysis includes studying their financial performance, market positioning, product portfolios, partnerships, and strategies.
Consumer Analysis: Report covers data on consumer behaviour, preferences, and attitudes towards DIN 2353 Tube Fittings This may involve surveys, interviews, and analysis of consumer reviews and feedback from different by Application (Industrial Application, Engineering Machinery).
Technology Analysis: Report covers specific technologies relevant to DIN 2353 Tube Fittings. It assesses the current state, advancements, and potential future developments in DIN 2353 Tube Fittings areas.
Competitive Landscape: By analyzing individual companies, suppliers, and consumers, the report present insights into the competitive landscape of the DIN 2353 Tube Fittings market. This analysis helps understand market share, competitive advantages, and potential areas for differentiation among industry players.
Market Validation: The report involves validating findings and projections through primary research, such as surveys, interviews, and focus groups.
Market Segmentation
DIN 2353 Tube Fittings market is split by Material and by Application. For the period 2018-2029, the growth among segments provides accurate calculations and forecasts for consumption value by Material, and by Application in terms of volume and value.
Market segment by Material
Stainless Steel Tube Fittings
Carbon Steel Tube Fittings
Brass Tube Fittings
Market segment by Application
Industrial Application
Engineering Machinery
Shipbuilding & Railway
Energy and Power
Others
Major players covered
VOSS
STAUFF (LUKAD Holding)
Rastelli Raccordi
CAST S.p.A.
Volz
Interpump Group
Blanke Armaturen
Hy-Lok
Parker Hannifin
Gates EMB
Schwer Fittings
DK-LOK
Superlok (BMT)
PH Industrie-Hydraulik
Alfagomma
EXMAR (SERTO)
CONEXA GmbH
Manuli Hydraulics
Hansun Engineering
Eaton
SHINILACE
Armaturen-Arndt
HSME Corporation
Cangzhou QC Hydraulics
Eurofit
Sekwang Hi-Tech
Leku-Ona
Market segment by region, regional analysis covers
North America (United States, Canada and Mexico)
Europe (Germany, France, United Kingdom, Russia, Italy, and Rest of Europe)
Asia-Pacific (China, Japan, Korea, India, Southeast Asia, and Australia)
South America (Brazil, Argentina, Colombia, and Rest of South America)
Middle East & Africa (Saudi Arabia, UAE, Egypt, South Africa, and Rest of Middle East & Africa)
The content of the study subjects, includes a total of 15 chapters:
Chapter 1, to describe DIN 2353 Tube Fittings product scope, market overview, market estimation caveats and base year.
Chapter 2, to profile the top manufacturers of DIN 2353 Tube Fittings, with price, sales, revenue and global market share of DIN 2353 Tube Fittings from 2018 to 2023.
Chapter 3, the DIN 2353 Tube Fittings competitive situation, sales quantity, revenue and global market share of top manufacturers are analyzed emphatically by landscape contrast.
Chapter 4, the DIN 2353 Tube Fittings breakdown data are shown at the regional level, to show the sales quantity, consumption value and growth by regions, from 2018 to 2029.
Chapter 5 and 6, to segment the sales by Material and application, with sales market share and growth rate by material, application, from 2018 to 2029.
Chapter 7, 8, 9, 10 and 11, to break the sales data at the country level, with sales quantity, consumption value and market share for key countries in the world, from 2017 to 2022.and DIN 2353 Tube Fittings market forecast, by regions, material and application, with sales and revenue, from 2024 to 2029.
Chapter 12, market dynamics, drivers, restraints, trends, Porters Five Forces analysis, and Influence of COVID-19 and Russia-Ukraine War.
Chapter 13, the key raw materials and key suppliers, and industry chain of DIN 2353 Tube Fittings.
Chapter 14 and 15, to describe DIN 2353 Tube Fittings sales channel, distributors, customers, research findings and conclusion.
Index1 Market Overview
1.1 Product Overview and Scope of DIN 2353 Tube Fittings
1.2 Market Estimation Caveats and Base Year
1.3 Market Analysis by Material
1.3.1 Overview: Global DIN 2353 Tube Fittings Consumption Value by Material: 2018 Versus 2022 Versus 2029
1.3.2 Stainless Steel Tube Fittings
1.3.3 Carbon Steel Tube Fittings
1.3.4 Brass Tube Fittings
1.4 Market Analysis by Application
1.4.1 Overview: Global DIN 2353 Tube Fittings Consumption Value by Application: 2018 Versus 2022 Versus 2029
1.4.2 Industrial Application
1.4.3 Engineering Machinery
1.4.4 Shipbuilding & Railway
1.4.5 Energy and Power
1.4.6 Others
1.5 Global DIN 2353 Tube Fittings Market Size & Forecast
1.5.1 Global DIN 2353 Tube Fittings Consumption Value (2018 & 2022 & 2029)
1.5.2 Global DIN 2353 Tube Fittings Sales Quantity (2018-2029)
1.5.3 Global DIN 2353 Tube Fittings Average Price (2018-2029)
2 Manufacturers Profiles
2.1 VOSS
2.1.1 VOSS Details
2.1.2 VOSS Major Business
2.1.3 VOSS DIN 2353 Tube Fittings Product and Services
2.1.4 VOSS DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.1.5 VOSS Recent Developments/Updates
2.2 STAUFF (LUKAD Holding)
2.2.1 STAUFF (LUKAD Holding) Details
2.2.2 STAUFF (LUKAD Holding) Major Business
2.2.3 STAUFF (LUKAD Holding) DIN 2353 Tube Fittings Product and Services
2.2.4 STAUFF (LUKAD Holding) DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.2.5 STAUFF (LUKAD Holding) Recent Developments/Updates
2.3 Rastelli Raccordi
2.3.1 Rastelli Raccordi Details
2.3.2 Rastelli Raccordi Major Business
2.3.3 Rastelli Raccordi DIN 2353 Tube Fittings Product and Services
2.3.4 Rastelli Raccordi DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.3.5 Rastelli Raccordi Recent Developments/Updates
2.4 CAST S.p.A.
2.4.1 CAST S.p.A. Details
2.4.2 CAST S.p.A. Major Business
2.4.3 CAST S.p.A. DIN 2353 Tube Fittings Product and Services
2.4.4 CAST S.p.A. DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.4.5 CAST S.p.A. Recent Developments/Updates
2.5 Volz
2.5.1 Volz Details
2.5.2 Volz Major Business
2.5.3 Volz DIN 2353 Tube Fittings Product and Services
2.5.4 Volz DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.5.5 Volz Recent Developments/Updates
2.6 Interpump Group
2.6.1 Interpump Group Details
2.6.2 Interpump Group Major Business
2.6.3 Interpump Group DIN 2353 Tube Fittings Product and Services
2.6.4 Interpump Group DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.6.5 Interpump Group Recent Developments/Updates
2.7 Blanke Armaturen
2.7.1 Blanke Armaturen Details
2.7.2 Blanke Armaturen Major Business
2.7.3 Blanke Armaturen DIN 2353 Tube Fittings Product and Services
2.7.4 Blanke Armaturen DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.7.5 Blanke Armaturen Recent Developments/Updates
2.8 Hy-Lok
2.8.1 Hy-Lok Details
2.8.2 Hy-Lok Major Business
2.8.3 Hy-Lok DIN 2353 Tube Fittings Product and Services
2.8.4 Hy-Lok DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.8.5 Hy-Lok Recent Developments/Updates
2.9 Parker Hannifin
2.9.1 Parker Hannifin Details
2.9.2 Parker Hannifin Major Business
2.9.3 Parker Hannifin DIN 2353 Tube Fittings Product and Services
2.9.4 Parker Hannifin DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.9.5 Parker Hannifin Recent Developments/Updates
2.10 Gates EMB
2.10.1 Gates EMB Details
2.10.2 Gates EMB Major Business
2.10.3 Gates EMB DIN 2353 Tube Fittings Product and Services
2.10.4 Gates EMB DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.10.5 Gates EMB Recent Developments/Updates
2.11 Schwer Fittings
2.11.1 Schwer Fittings Details
2.11.2 Schwer Fittings Major Business
2.11.3 Schwer Fittings DIN 2353 Tube Fittings Product and Services
2.11.4 Schwer Fittings DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.11.5 Schwer Fittings Recent Developments/Updates
2.12 DK-LOK
2.12.1 DK-LOK Details
2.12.2 DK-LOK Major Business
2.12.3 DK-LOK DIN 2353 Tube Fittings Product and Services
2.12.4 DK-LOK DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.12.5 DK-LOK Recent Developments/Updates
2.13 Superlok (BMT)
2.13.1 Superlok (BMT) Details
2.13.2 Superlok (BMT) Major Business
2.13.3 Superlok (BMT) DIN 2353 Tube Fittings Product and Services
2.13.4 Superlok (BMT) DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.13.5 Superlok (BMT) Recent Developments/Updates
2.14 PH Industrie-Hydraulik
2.14.1 PH Industrie-Hydraulik Details
2.14.2 PH Industrie-Hydraulik Major Business
2.14.3 PH Industrie-Hydraulik DIN 2353 Tube Fittings Product and Services
2.14.4 PH Industrie-Hydraulik DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.14.5 PH Industrie-Hydraulik Recent Developments/Updates
2.15 Alfagomma
2.15.1 Alfagomma Details
2.15.2 Alfagomma Major Business
2.15.3 Alfagomma DIN 2353 Tube Fittings Product and Services
2.15.4 Alfagomma DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.15.5 Alfagomma Recent Developments/Updates
2.16 EXMAR (SERTO)
2.16.1 EXMAR (SERTO) Details
2.16.2 EXMAR (SERTO) Major Business
2.16.3 EXMAR (SERTO) DIN 2353 Tube Fittings Product and Services
2.16.4 EXMAR (SERTO) DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.16.5 EXMAR (SERTO) Recent Developments/Updates
2.17 CONEXA GmbH
2.17.1 CONEXA GmbH Details
2.17.2 CONEXA GmbH Major Business
2.17.3 CONEXA GmbH DIN 2353 Tube Fittings Product and Services
2.17.4 CONEXA GmbH DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.17.5 CONEXA GmbH Recent Developments/Updates
2.18 Manuli Hydraulics
2.18.1 Manuli Hydraulics Details
2.18.2 Manuli Hydraulics Major Business
2.18.3 Manuli Hydraulics DIN 2353 Tube Fittings Product and Services
2.18.4 Manuli Hydraulics DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.18.5 Manuli Hydraulics Recent Developments/Updates
2.19 Hansun Engineering
2.19.1 Hansun Engineering Details
2.19.2 Hansun Engineering Major Business
2.19.3 Hansun Engineering DIN 2353 Tube Fittings Product and Services
2.19.4 Hansun Engineering DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.19.5 Hansun Engineering Recent Developments/Updates
2.20 Eaton
2.20.1 Eaton Details
2.20.2 Eaton Major Business
2.20.3 Eaton DIN 2353 Tube Fittings Product and Services
2.20.4 Eaton DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.20.5 Eaton Recent Developments/Updates
2.21 SHINILACE
2.21.1 SHINILACE Details
2.21.2 SHINILACE Major Business
2.21.3 SHINILACE DIN 2353 Tube Fittings Product and Services
2.21.4 SHINILACE DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.21.5 SHINILACE Recent Developments/Updates
2.22 Armaturen-Arndt
2.22.1 Armaturen-Arndt Details
2.22.2 Armaturen-Arndt Major Business
2.22.3 Armaturen-Arndt DIN 2353 Tube Fittings Product and Services
2.22.4 Armaturen-Arndt DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.22.5 Armaturen-Arndt Recent Developments/Updates
2.23 HSME Corporation
2.23.1 HSME Corporation Details
2.23.2 HSME Corporation Major Business
2.23.3 HSME Corporation DIN 2353 Tube Fittings Product and Services
2.23.4 HSME Corporation DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.23.5 HSME Corporation Recent Developments/Updates
2.24 Cangzhou QC Hydraulics
2.24.1 Cangzhou QC Hydraulics Details
2.24.2 Cangzhou QC Hydraulics Major Business
2.24.3 Cangzhou QC Hydraulics DIN 2353 Tube Fittings Product and Services
2.24.4 Cangzhou QC Hydraulics DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.24.5 Cangzhou QC Hydraulics Recent Developments/Updates
2.25 Eurofit
2.25.1 Eurofit Details
2.25.2 Eurofit Major Business
2.25.3 Eurofit DIN 2353 Tube Fittings Product and Services
2.25.4 Eurofit DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.25.5 Eurofit Recent Developments/Updates
2.26 Sekwang Hi-Tech
2.26.1 Sekwang Hi-Tech Details
2.26.2 Sekwang Hi-Tech Major Business
2.26.3 Sekwang Hi-Tech DIN 2353 Tube Fittings Product and Services
2.26.4 Sekwang Hi-Tech DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.26.5 Sekwang Hi-Tech Recent Developments/Updates
2.27 Leku-Ona
2.27.1 Leku-Ona Details
2.27.2 Leku-Ona Major Business
2.27.3 Leku-Ona DIN 2353 Tube Fittings Product and Services
2.27.4 Leku-Ona DIN 2353 Tube Fittings Sales Quantity, Average Price, Revenue, Gross Margin and Market Share (2018-2023)
2.27.5 Leku-Ona Recent Developments/Updates
3 Competitive Environment: DIN 2353 Tube Fittings by Manufacturer
3.1 Global DIN 2353 Tube Fittings Sales Quantity by Manufacturer (2018-2023)
3.2 Global DIN 2353 Tube Fittings Revenue by Manufacturer (2018-2023)
3.3 Global DIN 2353 Tube Fittings Average Price by Manufacturer (2018-2023)
3.4 Market Share Analysis (2022)
3.4.1 Producer Shipments of DIN 2353 Tube Fittings by Manufacturer Revenue ($MM) and Market Share (%): 2022
3.4.2 Top 3 DIN 2353 Tube Fittings Manufacturer Market Share in 2022
3.4.2 Top 6 DIN 2353 Tube Fittings Manufacturer Market Share in 2022
3.5 DIN 2353 Tube Fittings Market: Overall Company Footprint Analysis
3.5.1 DIN 2353 Tube Fittings Market: Region Footprint
3.5.2 DIN 2353 Tube Fittings Market: Company Product Type Footprint
3.5.3 DIN 2353 Tube Fittings Market: Company Product Application Footprint
3.6 New Market Entrants and Barriers to Market Entry
3.7 Mergers, Acquisition, Agreements, and Collaborations
4 Consumption Analysis by Region
4.1 Global DIN 2353 Tube Fittings Market Size by Region
4.1.1 Global DIN 2353 Tube Fittings Sales Quantity by Region (2018-2029)
4.1.2 Global DIN 2353 Tube Fittings Consumption Value by Region (2018-2029)
4.1.3 Global DIN 2353 Tube Fittings Average Price by Region (2018-2029)
4.2 North America DIN 2353 Tube Fittings Consumption Value (2018-2029)
4.3 Europe DIN 2353 Tube Fittings Consumption Value (2018-2029)
4.4 Asia-Pacific DIN 2353 Tube Fittings Consumption Value (2018-2029)
4.5 South America DIN 2353 Tube Fittings Consumption Value (2018-2029)
4.6 Middle East and Africa DIN 2353 Tube Fittings Consumption Value (2018-2029)
5 Market Segment by Material
5.1 Global DIN 2353 Tube Fittings Sales Quantity by Material (2018-2029)
5.2 Global DIN 2353 Tube Fittings Consumption Value by Material (2018-2029)
5.3 Global DIN 2353 Tube Fittings Average Price by Material (2018-2029)
6 Market Segment by Application
6.1 Global DIN 2353 Tube Fittings Sales Quantity by Application (2018-2029)
6.2 Global DIN 2353 Tube Fittings Consumption Value by Application (2018-2029)
6.3 Global DIN 2353 Tube Fittings Average Price by Application (2018-2029)
7 North America
7.1 North America DIN 2353 Tube Fittings Sales Quantity by Material (2018-2029)
7.2 North America DIN 2353 Tube Fittings Sales Quantity by Application (2018-2029)
7.3 North America DIN 2353 Tube Fittings Market Size by Country
7.3.1 North America DIN 2353 Tube Fittings Sales Quantity by Country (2018-2029)
7.3.2 North America DIN 2353 Tube Fittings Consumption Value by Country (2018-2029)
7.3.3 United States Market Size and Forecast (2018-2029)
7.3.4 Canada Market Size and Forecast (2018-2029)
7.3.5 Mexico Market Size and Forecast (2018-2029)
8 Europe
8.1 Europe DIN 2353 Tube Fittings Sales Quantity by Material (2018-2029)
8.2 Europe DIN 2353 Tube Fittings Sales Quantity by Application (2018-2029)
8.3 Europe DIN 2353 Tube Fittings Market Size by Country
8.3.1 Europe DIN 2353 Tube Fittings Sales Quantity by Country (2018-2029)
8.3.2 Europe DIN 2353 Tube Fittings Consumption Value by Country (2018-2029)
8.3.3 Germany Market Size and Forecast (2018-2029)
8.3.4 France Market Size and Forecast (2018-2029)
8.3.5 United Kingdom Market Size and Forecast (2018-2029)
8.3.6 Russia Market Size and Forecast (2018-2029)
8.3.7 Italy Market Size and Forecast (2018-2029)
9 Asia-Pacific
9.1 Asia-Pacific DIN 2353 Tube Fittings Sales Quantity by Material (2018-2029)
9.2 Asia-Pacific DIN 2353 Tube Fittings Sales Quantity by Application (2018-2029)
9.3 Asia-Pacific DIN 2353 Tube Fittings Market Size by Region
9.3.1 Asia-Pacific DIN 2353 Tube Fittings Sales Quantity by Region (2018-2029)
9.3.2 Asia-Pacific DIN 2353 Tube Fittings Consumption Value by Region (2018-2029)
9.3.3 China Market Size and Forecast (2018-2029)
9.3.4 Japan Market Size and Forecast (2018-2029)
9.3.5 Korea Market Size and Forecast (2018-2029)
9.3.6 India Market Size and Forecast (2018-2029)
9.3.7 Southeast Asia Market Size and Forecast (2018-2029)
9.3.8 Australia Market Size and Forecast (2018-2029)
10 South America
10.1 South America DIN 2353 Tube Fittings Sales Quantity by Material (2018-2029)
10.2 South America DIN 2353 Tube Fittings Sales Quantity by Application (2018-2029)
10.3 South America DIN 2353 Tube Fittings Market Size by Country
10.3.1 South America DIN 2353 Tube Fittings Sales Quantity by Country (2018-2029)
10.3.2 South America DIN 2353 Tube Fittings Consumption Value by Country (2018-2029)
10.3.3 Brazil Market Size and Forecast (2018-2029)
10.3.4 Argentina Market Size and Forecast (2018-2029)
11 Middle East & Africa
11.1 Middle East & Africa DIN 2353 Tube Fittings Sales Quantity by Material (2018-2029)
11.2 Middle East & Africa DIN 2353 Tube Fittings Sales Quantity by Application (2018-2029)
11.3 Middle East & Africa DIN 2353 Tube Fittings Market Size by Country
11.3.1 Middle East & Africa DIN 2353 Tube Fittings Sales Quantity by Country (2018-2029)
11.3.2 Middle East & Africa DIN 2353 Tube Fittings Consumption Value by Country (2018-2029)
11.3.3 Turkey Market Size and Forecast (2018-2029)
11.3.4 Egypt Market Size and Forecast (2018-2029)
11.3.5 Saudi Arabia Market Size and Forecast (2018-2029)
11.3.6 South Africa Market Size and Forecast (2018-2029)
12 Market Dynamics
12.1 DIN 2353 Tube Fittings Market Drivers
12.2 DIN 2353 Tube Fittings Market Restraints
12.3 DIN 2353 Tube Fittings Trends Analysis
12.4 Porters Five Forces Analysis
12.4.1 Threat of New Entrants
12.4.2 Bargaining Power of Suppliers
12.4.3 Bargaining Power of Buyers
12.4.4 Threat of Substitutes
12.4.5 Competitive Rivalry
12.5 Influence of COVID-19 and Russia-Ukraine War
12.5.1 Influence of COVID-19
12.5.2 Influence of Russia-Ukraine War
13 Raw Material and Industry Chain
13.1 Raw Material of DIN 2353 Tube Fittings and Key Manufacturers
13.2 Manufacturing Costs Percentage of DIN 2353 Tube Fittings
13.3 DIN 2353 Tube Fittings Production Process
13.4 DIN 2353 Tube Fittings Industrial Chain
14 Shipments by Distribution Channel
14.1 Sales Channel
14.1.1 Direct to End-User
14.1.2 Distributors
14.2 DIN 2353 Tube Fittings Typical Distributors
14.3 DIN 2353 Tube Fittings Typical Customers
15 Research Findings and Conclusion
16 Appendix
16.1 Methodology
16.2 Research Process and Data Source
16.3 Disclaimer
Published By : GlobalInfoResearch
Why ‘The Market Reports’
In Business:
Pre Sales Support:
Post Sales Support:
Turn Around Time:
Clients Served:
Clients Assisted:
Client Types:
Payment:
- Accept global payments [Credit Card / PayPal / Wire Transfer]
- Accept local payments in South Korea, Germany, China and India [Can pay in local currency]
Latest Industrial Market Reports
Payments Accepted From
Connect with us at
Complete Secure Website
