The Market Reports
Call: +1-631-407-1315 / +91-750-729-1479
Email: sales@themarketreports.com
Global Microturbine Generators Market Research Report 2025
Synopsis
Microturbines are small gas turbines, about the size of a refrigerator, with a stand-alone output of less than 1000kW. They evolved from car and truck turbochargers, aircraft auxiliary power units (APUs) and small jet engines.
High-velocity exhaust gases from the combustor spin the turbines used in microturbines. The basic principle of how a microturbine works is that the compressor and generator are mounted on the same power shaft as the turbine. Therefore, the compressor and generator also rotate together with the turbine. The generator spins at the same speed as the turbine and generates electricity. Electricity is first provided to power conditioning equipment and then supplied to the area where it is needed. The burner is supplied with gaseous fuel by a gas compressor. The compressor also supplies fresh compressed air to the combustion chamber through a recuperator. Here, the heat exchanger plays an important heat exchanger role. It absorbs heat from the hot gases from the turbine. It then provides this heat to the compressed air from the compressor. Therefore, the air supplied to the burner is hot and compressed. This helps improve the overall efficiency of the cycle.
Microturbine systems offer many advantages over reciprocating engine generators, such as higher power density (relative to footprint and weight), very low emissions, and few or only one moving part. Those designed with foil bearings and air cooling do not require oils, coolants or other hazardous substances. Microturbines also have the advantage of containing most of the waste heat in the relatively high-temperature exhaust, whereas a reciprocating engine's waste heat is distributed between its exhaust and cooling system.
The global Microturbine Generators market was valued at US$ 143.3 million in 2023 and is anticipated to reach US$ 229.9 million by 2030, witnessing a CAGR of 9.3% during the forecast period 2024-2030.
The key manufacturers of Microturbine Generators in the world are Capstone, Ansaldo Energia, Bladon Micro Turbines, Micro Turbine Technology, Ennpower, FlexEnergy and Brayton Energy, among which the market share of the top three manufacturers is more than 70%, and the largest manufacturer is Ansaldo Energia. The global production of microturbine generators is mainly distributed in North America, Europe and China, among which the market share of the top three production regions is more than 90%. At present, North America is the largest production region. In terms of its products, less than 30 kW accounts for nearly 80% of the market share, followed by 30 to 100 kW, 101 to 300 kW and more than 300 kW. As far as its application is concerned, the power is a major field of its application, with a market share of more than 60%, followed by the oil and gas industry and transportation.
This report aims to provide a comprehensive presentation of the global market for Microturbine Generators, with both quantitative and qualitative analysis, to help readers develop business/growth strategies, assess the market competitive situation, analyze their position in the current marketplace, and make informed business decisions regarding Microturbine Generators.
Report Scope
The Microturbine Generators market size, estimations, and forecasts are provided in terms of output/shipments (Units) and revenue ($ millions), considering 2023 as the base year, with history and forecast data for the period from 2019 to 2030. This report segments the global Microturbine Generators market comprehensively. Regional market sizes, concerning products by Type, by Application, and by players, are also provided.
For a more in-depth understanding of the market, the report provides profiles of the competitive landscape, key competitors, and their respective market ranks. The report also discusses technological trends and new product developments.
The report will help the Microturbine Generators manufacturers, new entrants, and industry chain related companies in this market with information on the revenues, production, and average price for the overall market and the sub-segments across the different segments, by company, by Type, by Application, and by regions.
Market Segmentation
By Company
Capstone
Ansaldo Energia
Bladon Micro Turbines
Micro Turbine Technology
Ennpower
FlexEnergy
Brayton Energy
Segment by Type
Below 30 KW
30 KW to 100KW
101KW to 300 KW
Above 300 KW
Segment by Application
Power
Transportation
Oil & Gas
Others
Production by Region
North America
Europe
China
Consumption by Region
North America
United States
Canada
Europe
Germany
France
U.K.
Italy
Russia
Asia-Pacific
China
Japan
South Korea
China Taiwan
Southeast Asia
India
Latin America, Middle East & Africa
Mexico
Brazil
Turkey
GCC Countries
Chapter Outline
Chapter 1: Introduces the report scope of the report, executive summary of different market segments (by region, by Type, by Application, etc), including the market size of each market segment, future development potential, and so on. It offers a high-level view of the current state of the market and its likely evolution in the short to mid-term, and long term.
Chapter 2: Detailed analysis of Microturbine Generators manufacturers competitive landscape, price, production and value market share, latest development plan, merger, and acquisition information, etc.
Chapter 3: Production/output, value of Microturbine Generators by region/country. It provides a quantitative analysis of the market size and development potential of each region in the next six years.
Chapter 4: Consumption of Microturbine Generators in regional level and country level. It provides a quantitative analysis of the market size and development potential of each region and its main countries and introduces the market development, future development prospects, market space, and production of each country in the world.
Chapter 5: Provides the analysis of various market segments by Type, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different market segments.
Chapter 6: Provides the analysis of various market segments by Application, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different downstream markets.
Chapter 7: Provides profiles of key players, introducing the basic situation of the main companies in the market in detail, including product production/output, value, price, gross margin, product introduction, recent development, etc.
Chapter 8: Analysis of industrial chain, including the upstream and downstream of the industry.
Chapter 9: Introduces the market dynamics, latest developments of the market, the driving factors and restrictive factors of the market, the challenges and risks faced by manufacturers in the industry, and the analysis of relevant policies in the industry.
Chapter 10: The main points and conclusions of the report.
Microturbines are small gas turbines, about the size of a refrigerator, with a stand-alone output of less than 1000kW. They evolved from car and truck turbochargers, aircraft auxiliary power units (APUs) and small jet engines.
High-velocity exhaust gases from the combustor spin the turbines used in microturbines. The basic principle of how a microturbine works is that the compressor and generator are mounted on the same power shaft as the turbine. Therefore, the compressor and generator also rotate together with the turbine. The generator spins at the same speed as the turbine and generates electricity. Electricity is first provided to power conditioning equipment and then supplied to the area where it is needed. The burner is supplied with gaseous fuel by a gas compressor. The compressor also supplies fresh compressed air to the combustion chamber through a recuperator. Here, the heat exchanger plays an important heat exchanger role. It absorbs heat from the hot gases from the turbine. It then provides this heat to the compressed air from the compressor. Therefore, the air supplied to the burner is hot and compressed. This helps improve the overall efficiency of the cycle.
Microturbine systems offer many advantages over reciprocating engine generators, such as higher power density (relative to footprint and weight), very low emissions, and few or only one moving part. Those designed with foil bearings and air cooling do not require oils, coolants or other hazardous substances. Microturbines also have the advantage of containing most of the waste heat in the relatively high-temperature exhaust, whereas a reciprocating engine's waste heat is distributed between its exhaust and cooling system.
The global Microturbine Generators market was valued at US$ 143.3 million in 2023 and is anticipated to reach US$ 229.9 million by 2030, witnessing a CAGR of 9.3% during the forecast period 2024-2030.
The key manufacturers of Microturbine Generators in the world are Capstone, Ansaldo Energia, Bladon Micro Turbines, Micro Turbine Technology, Ennpower, FlexEnergy and Brayton Energy, among which the market share of the top three manufacturers is more than 70%, and the largest manufacturer is Ansaldo Energia. The global production of microturbine generators is mainly distributed in North America, Europe and China, among which the market share of the top three production regions is more than 90%. At present, North America is the largest production region. In terms of its products, less than 30 kW accounts for nearly 80% of the market share, followed by 30 to 100 kW, 101 to 300 kW and more than 300 kW. As far as its application is concerned, the power is a major field of its application, with a market share of more than 60%, followed by the oil and gas industry and transportation.
This report aims to provide a comprehensive presentation of the global market for Microturbine Generators, with both quantitative and qualitative analysis, to help readers develop business/growth strategies, assess the market competitive situation, analyze their position in the current marketplace, and make informed business decisions regarding Microturbine Generators.
Report Scope
The Microturbine Generators market size, estimations, and forecasts are provided in terms of output/shipments (Units) and revenue ($ millions), considering 2023 as the base year, with history and forecast data for the period from 2019 to 2030. This report segments the global Microturbine Generators market comprehensively. Regional market sizes, concerning products by Type, by Application, and by players, are also provided.
For a more in-depth understanding of the market, the report provides profiles of the competitive landscape, key competitors, and their respective market ranks. The report also discusses technological trends and new product developments.
The report will help the Microturbine Generators manufacturers, new entrants, and industry chain related companies in this market with information on the revenues, production, and average price for the overall market and the sub-segments across the different segments, by company, by Type, by Application, and by regions.
Market Segmentation
By Company
Capstone
Ansaldo Energia
Bladon Micro Turbines
Micro Turbine Technology
Ennpower
FlexEnergy
Brayton Energy
Segment by Type
Below 30 KW
30 KW to 100KW
101KW to 300 KW
Above 300 KW
Segment by Application
Power
Transportation
Oil & Gas
Others
Production by Region
North America
Europe
China
Consumption by Region
North America
United States
Canada
Europe
Germany
France
U.K.
Italy
Russia
Asia-Pacific
China
Japan
South Korea
China Taiwan
Southeast Asia
India
Latin America, Middle East & Africa
Mexico
Brazil
Turkey
GCC Countries
Chapter Outline
Chapter 1: Introduces the report scope of the report, executive summary of different market segments (by region, by Type, by Application, etc), including the market size of each market segment, future development potential, and so on. It offers a high-level view of the current state of the market and its likely evolution in the short to mid-term, and long term.
Chapter 2: Detailed analysis of Microturbine Generators manufacturers competitive landscape, price, production and value market share, latest development plan, merger, and acquisition information, etc.
Chapter 3: Production/output, value of Microturbine Generators by region/country. It provides a quantitative analysis of the market size and development potential of each region in the next six years.
Chapter 4: Consumption of Microturbine Generators in regional level and country level. It provides a quantitative analysis of the market size and development potential of each region and its main countries and introduces the market development, future development prospects, market space, and production of each country in the world.
Chapter 5: Provides the analysis of various market segments by Type, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different market segments.
Chapter 6: Provides the analysis of various market segments by Application, covering the market size and development potential of each market segment, to help readers find the blue ocean market in different downstream markets.
Chapter 7: Provides profiles of key players, introducing the basic situation of the main companies in the market in detail, including product production/output, value, price, gross margin, product introduction, recent development, etc.
Chapter 8: Analysis of industrial chain, including the upstream and downstream of the industry.
Chapter 9: Introduces the market dynamics, latest developments of the market, the driving factors and restrictive factors of the market, the challenges and risks faced by manufacturers in the industry, and the analysis of relevant policies in the industry.
Chapter 10: The main points and conclusions of the report.
Index1 Microturbine Generators Market Overview
1.1 Product Definition
1.2 Microturbine Generators Segment by Type
1.2.1 Global Microturbine Generators Market Value Growth Rate Analysis by Type 2023 VS 2030
1.2.2 Below 30 KW
1.2.3 30 KW to 100KW
1.2.4 101KW to 300 KW
1.2.5 Above 300 KW
1.3 Microturbine Generators Segment by Application
1.3.1 Global Microturbine Generators Market Value Growth Rate Analysis by Application: 2023 VS 2030
1.3.2 Power
1.3.3 Transportation
1.3.4 Oil & Gas
1.3.5 Others
1.4 Global Market Growth Prospects
1.4.1 Global Microturbine Generators Production Value Estimates and Forecasts (2019-2030)
1.4.2 Global Microturbine Generators Production Capacity Estimates and Forecasts (2019-2030)
1.4.3 Global Microturbine Generators Production Estimates and Forecasts (2019-2030)
1.4.4 Global Microturbine Generators Market Average Price Estimates and Forecasts (2019-2030)
1.5 Assumptions and Limitations
2 Market Competition by Manufacturers
2.1 Global Microturbine Generators Production Market Share by Manufacturers (2019-2024)
2.2 Global Microturbine Generators Production Value Market Share by Manufacturers (2019-2024)
2.3 Global Key Players of Microturbine Generators, Industry Ranking, 2022 VS 2023 VS 2024
2.4 Global Microturbine Generators Market Share by Company Type (Tier 1, Tier 2 and Tier 3)
2.5 Global Microturbine Generators Average Price by Manufacturers (2019-2024)
2.6 Global Key Manufacturers of Microturbine Generators, Manufacturing Base Distribution and Headquarters
2.7 Global Key Manufacturers of Microturbine Generators, Product Offered and Application
2.8 Global Key Manufacturers of Microturbine Generators, Date of Enter into This Industry
2.9 Microturbine Generators Market Competitive Situation and Trends
2.9.1 Microturbine Generators Market Concentration Rate
2.9.2 Global 5 and 10 Largest Microturbine Generators Players Market Share by Revenue
2.10 Mergers & Acquisitions, Expansion
3 Microturbine Generators Production by Region
3.1 Global Microturbine Generators Production Value Estimates and Forecasts by Region: 2019 VS 2023 VS 2030
3.2 Global Microturbine Generators Production Value by Region (2019-2030)
3.2.1 Global Microturbine Generators Production Value Market Share by Region (2019-2024)
3.2.2 Global Forecasted Production Value of Microturbine Generators by Region (2025-2030)
3.3 Global Microturbine Generators Production Estimates and Forecasts by Region: 2019 VS 2023 VS 2030
3.4 Global Microturbine Generators Production by Region (2019-2030)
3.4.1 Global Microturbine Generators Production Market Share by Region (2019-2024)
3.4.2 Global Forecasted Production of Microturbine Generators by Region (2025-2030)
3.5 Global Microturbine Generators Market Price Analysis by Region (2019-2024)
3.6 Global Microturbine Generators Production and Value, Year-over-Year Growth
3.6.1 North America Microturbine Generators Production Value Estimates and Forecasts (2019-2030)
3.6.2 Europe Microturbine Generators Production Value Estimates and Forecasts (2019-2030)
3.6.3 China Microturbine Generators Production Value Estimates and Forecasts (2019-2030)
4 Microturbine Generators Consumption by Region
4.1 Global Microturbine Generators Consumption Estimates and Forecasts by Region: 2019 VS 2023 VS 2030
4.2 Global Microturbine Generators Consumption by Region (2019-2030)
4.2.1 Global Microturbine Generators Consumption by Region (2019-2024)
4.2.2 Global Microturbine Generators Forecasted Consumption by Region (2025-2030)
4.3 North America
4.3.1 North America Microturbine Generators Consumption Growth Rate by Country: 2019 VS 2023 VS 2030
4.3.2 North America Microturbine Generators Consumption by Country (2019-2030)
4.3.3 United States
4.3.4 Canada
4.4 Europe
4.4.1 Europe Microturbine Generators Consumption Growth Rate by Country: 2019 VS 2023 VS 2030
4.4.2 Europe Microturbine Generators Consumption by Country (2019-2030)
4.4.3 Germany
4.4.4 France
4.4.5 U.K.
4.4.6 Italy
4.4.7 Russia
4.5 Asia Pacific
4.5.1 Asia Pacific Microturbine Generators Consumption Growth Rate by Region: 2019 VS 2023 VS 2030
4.5.2 Asia Pacific Microturbine Generators Consumption by Region (2019-2030)
4.5.3 China
4.5.4 Japan
4.5.5 South Korea
4.5.6 China Taiwan
4.5.7 Southeast Asia
4.5.8 India
4.6 Latin America, Middle East & Africa
4.6.1 Latin America, Middle East & Africa Microturbine Generators Consumption Growth Rate by Country: 2019 VS 2023 VS 2030
4.6.2 Latin America, Middle East & Africa Microturbine Generators Consumption by Country (2019-2030)
4.6.3 Mexico
4.6.4 Brazil
4.6.5 Turkey
5 Segment by Type
5.1 Global Microturbine Generators Production by Type (2019-2030)
5.1.1 Global Microturbine Generators Production by Type (2019-2024)
5.1.2 Global Microturbine Generators Production by Type (2025-2030)
5.1.3 Global Microturbine Generators Production Market Share by Type (2019-2030)
5.2 Global Microturbine Generators Production Value by Type (2019-2030)
5.2.1 Global Microturbine Generators Production Value by Type (2019-2024)
5.2.2 Global Microturbine Generators Production Value by Type (2025-2030)
5.2.3 Global Microturbine Generators Production Value Market Share by Type (2019-2030)
5.3 Global Microturbine Generators Price by Type (2019-2030)
6 Segment by Application
6.1 Global Microturbine Generators Production by Application (2019-2030)
6.1.1 Global Microturbine Generators Production by Application (2019-2024)
6.1.2 Global Microturbine Generators Production by Application (2025-2030)
6.1.3 Global Microturbine Generators Production Market Share by Application (2019-2030)
6.2 Global Microturbine Generators Production Value by Application (2019-2030)
6.2.1 Global Microturbine Generators Production Value by Application (2019-2024)
6.2.2 Global Microturbine Generators Production Value by Application (2025-2030)
6.2.3 Global Microturbine Generators Production Value Market Share by Application (2019-2030)
6.3 Global Microturbine Generators Price by Application (2019-2030)
7 Key Companies Profiled
7.1 Capstone
7.1.1 Capstone Microturbine Generators Corporation Information
7.1.2 Capstone Microturbine Generators Product Portfolio
7.1.3 Capstone Microturbine Generators Production, Value, Price and Gross Margin (2019-2024)
7.1.4 Capstone Main Business and Markets Served
7.1.5 Capstone Recent Developments/Updates
7.2 Ansaldo Energia
7.2.1 Ansaldo Energia Microturbine Generators Corporation Information
7.2.2 Ansaldo Energia Microturbine Generators Product Portfolio
7.2.3 Ansaldo Energia Microturbine Generators Production, Value, Price and Gross Margin (2019-2024)
7.2.4 Ansaldo Energia Main Business and Markets Served
7.2.5 Ansaldo Energia Recent Developments/Updates
7.3 Bladon Micro Turbines
7.3.1 Bladon Micro Turbines Microturbine Generators Corporation Information
7.3.2 Bladon Micro Turbines Microturbine Generators Product Portfolio
7.3.3 Bladon Micro Turbines Microturbine Generators Production, Value, Price and Gross Margin (2019-2024)
7.3.4 Bladon Micro Turbines Main Business and Markets Served
7.3.5 Bladon Micro Turbines Recent Developments/Updates
7.4 Micro Turbine Technology
7.4.1 Micro Turbine Technology Microturbine Generators Corporation Information
7.4.2 Micro Turbine Technology Microturbine Generators Product Portfolio
7.4.3 Micro Turbine Technology Microturbine Generators Production, Value, Price and Gross Margin (2019-2024)
7.4.4 Micro Turbine Technology Main Business and Markets Served
7.4.5 Micro Turbine Technology Recent Developments/Updates
7.5 Ennpower
7.5.1 Ennpower Microturbine Generators Corporation Information
7.5.2 Ennpower Microturbine Generators Product Portfolio
7.5.3 Ennpower Microturbine Generators Production, Value, Price and Gross Margin (2019-2024)
7.5.4 Ennpower Main Business and Markets Served
7.5.5 Ennpower Recent Developments/Updates
7.6 FlexEnergy
7.6.1 FlexEnergy Microturbine Generators Corporation Information
7.6.2 FlexEnergy Microturbine Generators Product Portfolio
7.6.3 FlexEnergy Microturbine Generators Production, Value, Price and Gross Margin (2019-2024)
7.6.4 FlexEnergy Main Business and Markets Served
7.6.5 FlexEnergy Recent Developments/Updates
7.7 Brayton Energy
7.7.1 Brayton Energy Microturbine Generators Corporation Information
7.7.2 Brayton Energy Microturbine Generators Product Portfolio
7.7.3 Brayton Energy Microturbine Generators Production, Value, Price and Gross Margin (2019-2024)
7.7.4 Brayton Energy Main Business and Markets Served
7.7.5 Brayton Energy Recent Developments/Updates
8 Industry Chain and Sales Channels Analysis
8.1 Microturbine Generators Industry Chain Analysis
8.2 Microturbine Generators Key Raw Materials
8.2.1 Key Raw Materials
8.2.2 Raw Materials Key Suppliers
8.3 Microturbine Generators Production Mode & Process
8.4 Microturbine Generators Sales and Marketing
8.4.1 Microturbine Generators Sales Channels
8.4.2 Microturbine Generators Distributors
8.5 Microturbine Generators Customers
9 Microturbine Generators Market Dynamics
9.1 Microturbine Generators Industry Trends
9.2 Microturbine Generators Market Drivers
9.3 Microturbine Generators Market Challenges
9.4 Microturbine Generators Market Restraints
10 Research Finding and Conclusion
11 Methodology and Data Source
11.1 Methodology/Research Approach
11.1.1 Research Programs/Design
11.1.2 Market Size Estimation
11.1.3 Market Breakdown and Data Triangulation
11.2 Data Source
11.2.1 Secondary Sources
11.2.2 Primary Sources
11.3 Author List
11.4 Disclaimer
Published By : QY Research
Why ‘The Market Reports’
In Business:
Pre Sales Support:
Post Sales Support:
Turn Around Time:
Clients Served:
Clients Assisted:
Client Types:
Payment:
- Accept global payments [Credit Card / PayPal / Wire Transfer]
- Accept local payments in South Korea, Germany, China and India [Can pay in local currency]
Latest Industrial Market Reports
Payments Accepted From
Connect with us at
Complete Secure Website
